- “OutBack Power SkyBox SBX5048 > 5000VA 120/240 Volt Grid-Hybrid Inverter” already exists in your wishlist
-
Primus Windpower 2-ARAC-101 > Stop Switch Kit For AIR Breeze, AIR 40 and AIR X, Silent X and AIR 30 (all voltages)
The Primus Windpower 3-Position Stop Switch is recommended as an easy method for shutting down both Air Breeze and Air X Turbines (a switch is included with each new Air Breeze turbine). This super heavy duty switch is “triple sealed” with a flexible acrylic coating, T5 clear vapor seal and a toggle boot cover.
$49.00 -
Discover Battery LYNK 950-0016-VICTRON > LYNK Edge Card for Victron Victron inverter and charger systems with LYNK Communications Gateway
Edge Cards (daughter boards) can be added to the LYNK© to enable communications to specific inverter brands. A selection of cards will become available to match popular inverter brands. Two Edge Cards can be used at one time for various inverters and charge controllers in one system. The SMA card is used to interface the AES battery bank with an SMA Sunny Island inverter system.
$106.00 -
Discover Battery LYNK 950-0016-SLRK > LYNK Edge Card for Sol-Ark Inverter and Charger Systems with LYNK Communications Gateway
Edge Cards (daughter boards) can be added to the LYNK© to enable communications to specific inverter brands. A selection of cards will become available to match popular inverter brands. Two Edge Cards can be used at one time for various inverters and charge controllers in one system. The SMA card is used to interface the AES battery bank with an SMA Sunny Island inverter system. The VICTRON card is used to interface the AES battery bank with Victron inverter and charger systems.
$106.00 -
Discover Battery LYNK 50-0016-XNBS > LYNK Edge Card for Schneider Xanbus enabled devices with LYNK Communications Gateway
Edge Cards (daughter boards) can be added to the LYNK© to enable communications to specific inverter brands. A selection of cards will become available to match popular inverter brands. Two Edge Cards can be used at one time for various inverters and charge controllers in one system. The SMA card is used to interface the AES battery bank with an SMA Sunny Island inverter system. The VICTRON card is used to interface the AES battery bank with Victron inverter and charger systems. The SLRK card is used to interface the AES battery bank with Sol-Ark inverter and charger systems. The 42-48-6650 and 44-24-2800 batteries will communicate directly to Xanbus devices from Schneider XW and SW inverters and charge controls. The 44-48-3000 needs the LYNK and Xanbus card to communicate with Schneider equipment.
$112.00 -
SimpliPhi Bracket PHI 3.8 KWH > Mounting Bracket for SimpliPhi PHI 3.8 Batteries
SimpliPhi Power Mounting Brackets are designed to secure one PHI 3.8 kWh Smart-Tech Battery to a load bearing surface. SimpliPhi Power Smart-Tech Batteries (PHI 3.5) can be mounted in practically any orientation (Terminals Up, Down, On Side). The brackets can be mounted directly to a wall or can be arranged on strut channels for ease of positioning.
$140.00 -
Discover Battery Wall Bracket 950-0023 > Wall bracket for AES-44-48-3000 battery
Discover Battery Wall Bracket 950-0023 > Wall bracket for AES-44-48-3000 battery
$180.00 -
Discover Battery Wall Bracket BKT-6650 > Wall mount bracket for 42-48-6650 battery
Discover Battery Wall Bracket BKT-6650 > Wall mount bracket for 42-48-6650 battery
$186.00 -
Roof Mount Kit – Primus Wind Power 1-TWA-19-01 > Roof Mount Kit with seal – Includes Base Plates, Isolators, Hardware and Seal
This wind turbine roof mount kit is designed to be simple to install and to reduce the vibrations that a wind turbine may produce. It is specifically designed for the mounting of the “AIR” series of wind turbine.
$229.00 -
Sol-Ark SA-CT-LG > 200A Current Transformer for Sol-Ark Inverters (fits up to 4/0) – PER PAIR
200A Current Transformers (fits up to 4/0) – PER PAIR
$250.00 -
Primus Windpower 2-ARAC-D-40 > 40 Amp Digital Wind Control Panel – For AIR 30, AIR Silent X and AIR X Marine 12V
The WCP-D controls and monitors the wind turbine. It is equipped with a power On/Off circuit breaker, digital meter and a Stop/Run switch (for direct control of the turbine). The digital meter (equipped with a 50 amp shunt) provides critical operational information; real time battery voltage, current in amps, power in Watts and accumulated energy in W/hours (re-settable). A clearly marked rear terminal block is provided for easy interconnect of the two turbine wires and two battery power wires. Panel is fully calibrated and ready for installation.
$319.00 -
Primus Windpower 2-ARAC-D-25 > 25 Amp Digital Wind Control Panel – For AIR 30, AIR Silent X and AIR X Marine 24V
The WCP-D controls and monitors the wind turbine. It is equipped with a power On/Off circuit breaker, digital meter and a Stop/Run switch (for direct control of the turbine). The digital meter (equipped with a 50 amp shunt) provides critical operational information; real time battery voltage, current in amps, power in Watts and accumulated energy in W/hours (re-settable). A clearly marked rear terminal block is provided for easy interconnect of the two turbine wires and two battery power wires. Panel is fully calibrated and ready for installation.
$319.00 -
Primus Windpower 2-ARAC-D-20 (160W) > 20 Amp Digital Wind Control Panel – For AIR 40 and AIR Silent X 12V
The WCP-D controls and monitors the wind turbine. It is equipped with a power On/Off circuit breaker, digital meter and a Stop/Run switch (for direct control of the turbine). The digital meter (equipped with a 50 amp shunt) provides critical operational information; real time battery voltage, current in amps, power in Watts and accumulated energy in W/hours (re-settable). A clearly marked rear terminal block is provided for easy interconnect of the two turbine wires and two battery power wires. Panel is fully calibrated and ready for installation.
$319.00