Outback Power Radian GS4048A-AC > 4000W 48V 120/240 VAC Inverter/Charger with Power panel for AC Coupling
Roll over image to zoom in
$5,045.00
OutBack Power has two bundles available for AC Coupling, the GS4048A-AC and GS8048A-AC. These have either the GS4048A or GS8048A Radian Inverter/Charger. The GS8048A-AC can have up to 6kW grid tie inverter capacity coupled to it, and the GS4048A-AC can have up to 3kW of grid tie inverter capacity coupled to it. More recent grid tie inverters that are listed to UL1741-SA will modulate their output with the frequency shift in the Radian inverter.
Detailed Description
OutBack Power has two bundles available for AC Coupling, the GS4048A-AC and GS8048A-AC. These have either the GS4048A or GS8048A Radian Inverter/Charger. The GS8048A-AC can have up to 6kW grid tie inverter capacity coupled to it, and the GS4048A-AC can have up to 3kW of grid tie inverter capacity coupled to it. More recent grid tie inverters that are listed to UL1741-SA will modulate their output with the frequency shift in the Radian inverter. The inverter frequency will also shift to limit the grid tie inverter to prevent more current than the AC Charge Current setting. Older grid tie inverters will drop off line when the frequency shifts enough, and come back on line when the battery voltage drops down. When operating off grid and the battery bank is depleted and the inverter shuts off on low battery, the system may not allow a charge from the grid tie inverter. An external charge source is needed to bring the battery voltage up so that it will AC couple again. The generator protection relay kit allows the use of a generator to run loads and recharge the battery while the grid tie inverter is disconnected so it will not back feed the generator.
Give the peace of mind that comes with having backup power in the event of a utility outage. The Radian Series AC coupling bundles from OutBack enable existing grid-tied systems to tap into the flexibility and freedom of battery backup in the face of the evolving energy landscape.
Manufacturer Part Number: GS4048A-AC
AC Coupling Bundle Includes:
- 4kW Radian Inverter/Charger
- GSLC175-120/240 load center
- MATE3s (and mounting bracket)
- Generator Protection Kit
- 30A Dual Pole Breaker
Features
AC coupling an existing system provides several advantages, including:
- Frequency shifting for complete control of the grid-tied inverter’s output
- Best voltage and current protection for all types of batteries
- Best protection and control for when you need a backup generator
- OutBack Power service and support
Specifications – GS4048A Inverter
| Nominal DC Input Voltage | 48 VDC |
| Continuous Output Power at 25 °C | 4000 VA |
| AC Output Voltage | 120/240 VAC |
| AC Output Frequency | 60 Hz |
| Continuous AC Output Current at 25 °C | 16.7 AAC at 240 VAC |
| Waveform | True Sinewave |
| CEC Weighted Efficiency | 92.5% |
| Total Harmonic Distortion (Typical) | <5% THD, Max single voltage harmonic <2% |
| Output Voltage Regulation | +/- 2% |
| Maximum Output Current (1 ms peak) | 50 AAC at 240 VAC |
| Maximum Output Current (100 ms RMS) | 35.35 AAC at 240 VAC |
| Overload Capability (100 ms surge) | 8.5 kVA at 240 VAC |
| Overload Capability (5 second) | 6.0 kVa |
| Overload Capability (30 minute) | 4.5 kVa |
| Idle Consumption – Invert mode, no load | 34 Watts |
| AC Input Voltage Range (Adjustable) (L1 or L2) | 85 – 140 VAC |
| AC Input Frequency Range | 54 – 66 Hz |
| Grid-Interactive Voltage Range (Default) | L1 or L2) 106 – 132 VAC |
| Grid-Interactive Frequency Range (Default) | (L1 or L2) 59.3 – 60.5 Hz |
| AC Input Current (Maximum) | 50 AAC |
| Maximum Utility Interactive Current | 15 A |
| Continuous Battery Charge Output | 57.5ADC |
| DC Input Voltage Range | 40 – 64 VDC |
Reviews
There are no reviews yet.